www.LCDRacks.com
Picture Adjustment and Menu Functions
1. BRIGHTNESS
- The BRIGHTNESS can be adjusted at any time by using the UP and DOWN keys on the unit
without going through the MENU.
2. COLOR / CONTRAST / TINT
adjustments - Press the MENU button on the front of the unit and use the UP and
DOWN keys to select COLOR, CONTRAST or TINT, once selected press the MENU button again to view the
control bar:
Then use the UP and DOWN keys to adjust the level.
To exit the menu, either use the EXIT selection on the screen, or let the menu exit on its own after five seconds of
non-activity.
3. SYSTEM SETUP
- Press the MENU button on the front of the unit and use the UP and DOWN keys to select
SYSTEM SETUP, once selected, press the MENU button again to view the sub-menu.
DIMMER
- This adjusts the intensity of the backlight, it can be set to LOW, MID or HIGH.
FSC SET
- This changes the frequency of the color subcarrier. This setting should be at 3.58MHz for
NTSC signals. It is not recommended to adjust this unless it becomes necessary to have the subcarrier
changed to 4.43MHz.
HOR and VER
- These settings allow the monitor to reverse scan in either the HORizontal or VERtical
direction, allowing a picture to be viewed either as a mirror image, or upside down.
4. TALLY SYSTEM
-
The tally system on the V-R82P is accessed via the DB-9 connector on the back of the unit.
The system works by closing the contacts between the ground pin and the corresponding LED pin. The system is
self powered, DO NOT GIVE POWER TO THE PINS. The pinout is as follows:
Warranty
Marshall Electronics warranties to the first consumer, that this
V-R82P
rackmount monitor will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for a period of one year
from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If
there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor
the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper
alterations or modifications in design or construction, voids this warranty.
No sales personnel of the seller, nor any other person is authorized to make any warranties other than those
described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time
period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
CONTRAST
Monitor 1
Monitor 2
Green
Pin 6
Pin 1
Red
Pin 7
Pin 2
Yellow
Pin 8
Pin 3
PIN 4 IS COMMON GROUND
