M-CT508-06 Camera-Top Monitor Owner’s Manual
6
7
www.LCDracks.com
Marshall Electronics
3. Operating Instruction
3.1 Menu operating instructions
Before setting the menu functions, please make sure the device is
connected correctly. Turn the Power switch (lower right corner of the unit)
dial to ON position. The monitor enters into working state. Turn dial to
OFF position when closing the unit. Press the “mode” button on the unit
to switch between “HDMI, VIDEO”. Press “MENU” button on the unit to
enter into OSD menu operation. Operate “▲”or “▼”on the unit to select
or adjust the needed options:
Color; Menu; Function; Sound;
After selecting the options, press “►”or “◄” on the unit to confirm, then
using “▲” or “▼” to select or adjust the value of Analog Data. After
confirm the needed adjust parameters, use “►” or “◄” to adjust. If you
need to exit OSD menu, repress “MENU” button.
Color
Enter into “Color” OSD, press “◄”or “►” button to confirm, then enter to
adjust the color parameters, use “▲” or ”▼” to select adjustment item,
then use “◄” or “►” adjust the parameters.
•
Saturation:
To adjust color concentration.
•
Hue:
Adjust balance between chroma channels.
•
Sharpness:
Sharpens horisontal and vertical edges in the image.
•
Color temperature:
Enter into (color) menu, press “◄” or “►”
on the unit to confirm, press ”▲” or “▲” to select the form of color
temperature, then press “◄” or “►” on the unit to confirm, then
use “▲” or ”▼” to select color temperature such as: 9300K,
6500K or USER. (the monitor leave the factory default is 6500K).
•
Brightness:
To adjust the display’s brightness.
•
Contrast:
To adjust ratio of the brightest and darkest parts of the
image.
Battery Plate:
This monitor is supplied with a Canon E6 battery plate.
To power the monitor with DSLR, camcorder or AA batteries,
please see battery configuration chart, page 11.
Battery installation
Suggestion: Remove the battery during long periods of inactivity.
Sunhood installation and Removal
Attach the self adhesive side of the Velcro® to the side of the monitor.
2. Power input
The monitor can be powered by the enclosed CE6 or equivalent battery
or by a 12V power adapter with at least 1Amp (optional). Please note the
input polarity is Center Positive.
Battery plate
