Marshall
M-CT5 Camera-Top Monitor Owner’s Manual
|
7
2. Power input
The monitor can be powered by the enclosed CE6 or equivalent battery
or by a 12V power adapter (optional). Please note the input polarity is
Positive with respect to --
○
-+, otherwise will damage the monitor!
3. Operating instruction
3.1 Menu operating instructions
Before setting the menu functions, please make sure the device is
connected correctly. Power switch (lower right corner of the unit) dial
to ON position. The monitor enters into working state. Please dial to
OFF position when closing the unit. After enter into working state,
press the “mode” button on the unit, according to the input video sig-
nal to switch “HDMI,VIDEO” (under NO menu state, using the short-
cut button on the panel to operate). Press “MENU”button on the unit,
then enter into OSD menu operation. Operate “
▲
”or “
▼
”on the unit to
select or adjust the needed optionals.
(color);
(menu);
(function);
(sound);
After selecting the optionals, press “
►
”or “
◄
” on the unit to con
fi
rm,
then using “
▲
” or “
▼
” to select or adjust the value of Analog Data. Af-
ter con
fi
rm the needed adjust parameters, using “
►
” or “
◄
” to adjust.
If you need to exit OSD menu, repress “MENU” button.
Color
Enter into “Color” OSD, press “
◄
”or “
►
” button to con
fi
rm, then enter to
adjust the color parameters, use “
▲
” or ”
▼
” to select adjustment item,
then use “
◄
” or “
►
” adjust the parameters.
¤ Brightness: To adjust the image’s brightness.
¤ Contrast: To adjust the brightest and darkest ratio of the image, please
note the sense of picture when adjust, proportion too large or small, will
make the picture lose the color of showy.
¤ Tint: On NTSC Video mode, the image color tint difference is
adjustable by tint.
¤ Saturation: To adjust color concentration.