Marshall Electronics LCD Rack Mounted Monitor V-R151P, User Manual, Page: 3 / 4

4
V-R151P Users Guide V-R151P Users Guide
2. Function Menu
(Use UP/DOWN/LEFT/RIGHT buttons to select function)
TV S-Video Video PC
Auto Con fi gure 9
DPMS
9 9 9
Reset 9 9 9 9
OSD Time Out 9 9 9 9
Sleep Timer
9
Language
AUTO Con fi gure – Used for PC signals to auto fi t image to screen.
DPMS – When selected to ON, the Digital Power Management System will place the monitor into standby when there is no
input signal for 12 seconds and will automatically turn on the monitor when a signal is applied to the last selected source.
Reset – Restores the monitor to factory settings
OSD TIME-OUT – Set time in seconds (0 to 60) for OSD to drop from screen after last button push
SLEEP TIMER – Used to automatically turn monitor off after programmed delay
Language – Not Used
3. TV SETUP MENU
(Use UP/DOWN/LEFT/RIGHT buttons to select function)
TV S-Video Video PC
Auto Search 9
Manual Search 9
Auto Fine Tune
9
Fine Tune 9
TV Source 9
AUTO Search – Will scan through all channels to fi nd available signals and automatically program the tuner.
Manual Search – Use to scan individual channels to add or eliminate channels of the tuner
Auto Fine Tune – Set to ON for automatic adjustment of each channel to achieve the strongest signal.
Set to OFF to enable manual adjustment of the TV tuner.
Fine Tune – When AUTO FINE TUNE is off, this function will be enabled for manual adjustment of the TV tuner
TV Source – Select between off air signals (Channels 2-69) or RF Cable system (Channel 1-125)
Fine Tune Menu
4. Screen Menu
(Use UP/ DOWN/ LEFT/ RIGHT buttons to select function)
TV S-Video Video PC
H-Position
9
V-Position 9
Frequency 9
V-Position – Use LEFT and RIGHT buttons to adjust horizontal position of the PC Image
H-Position – Use LEFT and RIGHT buttons to adjust wertical position of the PC Image
Frequency – Use LEFT and RIGHT buttons to adjust the pixel clock width of the PC Image