Power On/Off System indicator.
Illuminates Red when Power applied from
V-PS6-1.2 Power supply
1. Unpack the BD-0914, and accompanying V-PS6-1.2A power supply and physically inspect for any damage that may have occurred
during shipping. Also verify there is a small package with mounting accessories. Should there be any damage, immediately contact
Marshall Electronics at 800-800-6608. If you are not located within the continental united states call +1 310-333-0606.
2. Install in your desired location. If wall mounting is required, attach the mounting brackets by removing the Phillips head screws on
the sides, closest to the rear of the unit. (See below) Only one screw per side should be removed. Use the same screw to attach the
bracket with the flange facing away from the side and parallel to the front of the BD-0914 metal case. The flange has two holes. For
desktop use, apply the supplied rubber pads.
3. Connect required cables for signal input and output.
Plug the power supply into the A.C. source
4. Attach power connection to the back of the unit to
turn on power. Verify power on indicator active on
the front of the BD-0914.
Operational Setup
7
6
1910 East Maple Ave. El Segundo, CA 90245 • Tel.: 800-800-6608 • Fax:310-333-0688 • www.LCDRacks.com • Email: [email protected]
BD-0914 Distribution Amplifier Users Guide
Output 1 to 4 BNC,
If HDSDI is input signal, output will be HDSDI
If SDI is input signal, output will be SDI
6 VDC from
V-PS6-1.2A power supply
Left Pin - Pos
Right Pin- Neg
HDSDI or SDI Input BNC
7
8
Warranty
Marshall Electronics warranties to the fi rst consumer, that this BD-0914 HDSDI or SDI Signal Distribution Amplifi er will, under normal use, be free from
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the fi rst consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided
with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifi cations in design or
construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described
above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifi cations may change without notice.
7
7
Input Connectors
