Supplied Accessories:
• Users manual
• Universal 12vdc Class 2 power supply model V-PS12-5V1
Remote Control Option
• Available at a future date
Desk Stand Option
• Part number: VP-LCD171H-ST-01
3
Electrical Specifications
Screen Aspect
16:9/ 15:9/ 4:3/switchable
Display (Viewing Area)
17.1 Inch/434.38mm diagonal (372.48mm H x 223.488mm V)
Viewing Angles
180° In all directions
Resolution (RGB Dots)
1280H×RGBx768V (2.95 million pixels)
Dot Pitch
.291mm square pixel
Color Depth
16.7 million colors (8-bit)
Brightness (in cd/m²)
450 cd/m²
Contrast Ratio
500:1
Pixel Response
12ms rise/13ms fall
Backlight
Field Replaceable CCFL (50,000 hour half life)
LCD Screen Treatments
Anti Reflection, Anti Glare, Hardcoat
Estimated MTBF
5 years of 24/7/365 operation
Color temperature
D55, D65, D75, User
Color Gamut
SMPTE-C/EBU
Luma Linearity
T/- 3% with 5 ire increments (0 to 10 ire)
Storage Temperature
-4°F to 120°F (-20°C to 50°C)
Compliance
₠
, FCC-Class A, ANSI-63.4 (Certificates on file)
System
NTSC/PAL with auto recognition
Inputs
HD-15 (VGA, SVGA, XGA, RGB, YUV, Y-Pr-Pb 75
Ω
with AGC
BNC for HDSDI/SDI (PAL/NTSC) 75
Ω
with cable compensation to 1000’
BNC for Composite Video (PAL/NTSC) 75
Ω
with AGC
4 Pin Mini Din for S-Video (Y/C) with AGC
HD-15 Female for Tally
12-14VDC-Conxall Female
Active Outputs
Composite Active Loop - BNC,
HDSDI/SDI Shaped and Re-clocked - BNC
Y/C (S-video) Active Loop-4 Pin Mini-din Female
VGA, SVGA, XGA, , RGB, YUV, Y-Pr-Pb HD-15
Power Required
11.4 to 16.8 VDC
Power Consumption
prox. 35 watt nominal
Operating Temperature
32°F to 120°F (0°C to 50°C)
Compliance
₠
, FCC-Class A, ANSI-63.4 (Certificates on file)
RoHS WEEE/Environmental
Do not dispose. Return to Manufacturer or Authorized Recycle Facility
4
Mechanical Specifications
V-R171P-AFHD Dimensions
19.12”W x 13.77”H x 2.5”D (48.56cm x 34.98cm x 63.50cm)
V-R171P-AFHD Approx. Weight
12 lbs (0.54kg)
V-PS12-5V-1 Power Supply Weight
1 lbs (0.10kg)
5
Operational Setup
1. Unpack the V-R171P-AFHD and accompanying power supply. Physically inspect for any damage that may have occurred during shipping.
Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the continental united
states call +1 310-333-0606.
2. After inspection, install in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required
when installed to prevent possible damage to the V-R171P-AFHD internal components.
3. Connect required cables for signal input and output.
Please note that power must be applied to the V-R171P-AFHD for all of the looped outputs to be activated.
All BNC connectors should be rated for 75
Ω
4. Plug the power supply into the A.C. source
5. Attach twist lock power connection from power supply to the back of the unit.
6. Turn on the V-R171P-AFHD by depressing the power switch located on the front of the unit.
V-PS12-5V-1
Universal power supply
(U.L. class 2)
Optional Desktop
Stand
6
3
Marshall Electronics
V-R171P-AFHD Users Guide
V-R171P-AFHD Users Guide
Power (Standby) On/Off selection switch
Illuminates bright Green when power is applied
Turns dim Green when monitor is switched on
Screen aspect switch toggles 4:3, 16:9, 15:9 display aspect.
Hold 2 seconds for pixel to pixel mode toggle
8
Switch Settings, Adjustments and Indicators
Source selector switches for images displayed on screen
Selected source button will be illuminated.
COMPONENT/XGA selects HD-15 input connector used for
Y-Pr-Pb, RGB, or computer VGA signals. VGA button toggles between RGB and YPrPb
display modes.
OSD shows 5 seconds with each selection or signal change.
Pressing the source selection a second time will toggle the Blue Gun On/Off
Menu Toggle On-Off
Enables Advanced Functions Menu
15:9 Aspect full screen display
both indicators off
4:3 Aspect screen display
single LED
16:9 Aspect screen display
single LED iluminated
Screen adjustments
TINT adjust is not available for PAL, component, SDI and HDSDI signal standards.
TINT and COLOR adjust are not available for VGA signals
Marker Graphic Functions Toggle On/Off
(MENU UP Control)
Monochrome Toggle On/Off (MENU DOWN Control)
ZOOM Functions Toggle On/Off (MENU UP Control)
Set Zoom type in Advanced Function Menu
7
Connectors
* All Outputs Require Power to be
applied for activation
* Tally lamps active when connected
to ground
14 VDCV
power supply is included
Left Pin - Pos
Right Pin- Neg
Active Composite Output
Re-Clocked HDSDI/SDI Output.
Signal in equals signal out
Pin1 - GND
Pin2 - GND
Pin3 - Yout
Pin4 - Cout
S-Video Out
4 Pin Din (Female)
Component Video or VGA Output
HD-15 Female refer to Table 1 for
signal pin outs
Pin1- Green
Pin2- Red
Pin3-Amber
Pin4 Gnd -
Pin5-
Pin6-
Pin7-
Pin8-
Pin 9-
Pin10-
Pin11-
Pin12-
Pin13-
Pin14-
Pin15-
Tally IN DB-15 Female
Pin1 - GND
Pin2 - GND
Pin3 – Y in
Pin4 – C in
S-Video IN
4 Pin Din (Female)
Component Video or VGA INPUT
HD-15 Female refer to Table 1 for signal pin outs
and Table 2 for Signal Types
Composite Video IN
NTSC/PAL. Automatically terminates to 75
Ω
HDSDI or SDI in
270Mbs to 1.5Gbs
Automatically terminates to 75
Ω
Refer to Table 3 for signal types
