13
V-702W Menu Settings
Language
– sets on-screen messages to either English or Chinese.
Color Bar
– places color bars on screen to check the monitor operation.
OSD Time
– adjusts the amount of time menus remain on screen.
OSD Transparency
– adjusts the Transparency of menus for visibility
Knob Config
– customize the functions of Menu Knob.
The default operation of the menu knob, when menus are not on screen is as the headphone
volume control.
Each press after that will bring up a different function. The first, or default, function can be changed
so that it is Back Light, Brightness, Contrast, Saturation or Sharpness.
Color Calibration
– when it is turned on, all picture modifications will be turned off and the image
will be restored to its native, uncalibrated, state.
Comparison En
– When Comparison Mode is enabled, one half of the display will show an uncor-
rected image the other half will show the effect of Log, HDR or Gamma settings (whichever ones are
turned on at the time). This is a useful tool for analyzing the effects of these image modifiers.
Reset
– sets all menu items back to the way the unit ships from the factory.
8. EXIT
This page provides some information about the signal input parameters and the
system version for reference.
The
EXIT
page displays the current
state of the monitor. There are no se-
lections on this page.
Pressing the Menu Knob closes the
menu screen.
Source
– The currently selected input
SDI Mode
– The current SDI signal
type. (HDMI type is not displayed).
Resolution
– The pixel structure of the
current input signal. Horizontal x Vertical
Frame Rate
– The frame rate of the current input signal
and whether the signal is interlace or progressive
Color Space
– The sampling structure of the SDI signal.
”A” Indicates the presence of an Alpha or “Key” channel
MCU Version
– The version of MCU firmware.
FPGA Version
– The version of FPGA firmware.
SFPGA Version
– The version of SFPGA firmware.
