3. 'Out 1 / Left' Jack Socket - Passive Bypass
Out 1 is connected to a passive bypass circuit. The passive
bypass ensures complete tonal integrity by disconnecting the
output of the effects circuit when not in operation. When a
jack is connected to Out 1 the pedal operates in mono mode.
4. 'Out 2 /Right' Jack Socket - Spill-Over
Out 2 is connected to a spill-over circuit. When the pedal is
switched off and the regen it has produced is allowed to 'spill'
and rapidly decay over your playing while the input feeding the
effects circuit is switched off. When a jack is connected to Out
2 the pedal operates in mono mode.
When jacks are connected to Out 1 & Out 2 the pedal operates
in Stereo mode, the 2nd output's phase is inversed creating an
even more spacious modulation.
5. Mode
The Regenerator offers six different modulation modes.
Selected by switching the mode knob in to one of the six
positions.
Vintage Chorus
A classic chorus, adding mellow sweeps to
high speed vibrato and everything in between
to your sound.
Multi Chorus
Based upon Marshall's classic Supervibe
pedal, its unique sweeping pattern allows you
to create simple sweeps through to complex
ensemble sounds.
Vintage Flanger
The versatile vintage flanger let's you go
deep and detune your sound to extremes,
turn up the regen for it to soar across your
sound, or hold back to create natural flange
effects.
Phaser
A rich phasing effect making your sound
swell with energy, creating fluid waves which
wash around your tone.
5
4
Step Phaser
Adding a crystal staircase effect to the phaser
mode allows you to trip around its sweeping
textures.
Vintage Vibe
Get those good vibrations with this swirling
vintage vibe mode.
6. Speed
Controls the speed of the modulation tail from fully anti-
clockwise, providing slowly sweeping sounds, to fully
clockwise, generating fast vibrato.
7. Depth
Controls the amount of modulation applied to the signal. For
the vintage chorus, multi chorus and vintage flanger this
controls the amount of delay between the direct sound and
processed, greater depths causing a greater amount of
detuning. For the phaser, step phaser and vintage vibe this
controls the range of frequencies that are swept by the filters.
8. Regen
Controls the level of the regeneration, the amount of effect
sent back to the input. Fully anti-clockwise means no signal is
sent back, while fully clockwise sends gives the most signal
back accentuating the sound of the modulation sweeps.
9. Foot Switch
For switching the Regenerator on and off.
10. LED
Indicates when the Regenerator is in operation.
11. DC Input
For input of a 9V DC centre negative regulated adaptor should
you not wish to use batteries.
ENGLISH
