background image

005.

IC STATEMENT

 

This device complies with RSS247 of Industry Canada. 
Cet appareil se conforme à RSS247 de Canada d’Industrie. 

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device 
may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the 
device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux 
deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are 
safe for intended operation as described in this manual. 
The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower 
output power if such function is available.
Déclaration d’exposition aux radiations : Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le 
Canada établies pour un environnement non contrôlé. 
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut 
être conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle 
fonction est disponible.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B)

To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum 
shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
Pour empêcher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit être utilisé a l’intérieur et devrait être placé loin 
des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d’émission) est installé à l’extérieur, il
doit faire l’objet d’une licence.

Notice for 5 GHz devices
Caution: (i) The device for operation in the band 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems; (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz and
5470 - 5725 MHz shall comply with the e.i.r.p. limit: and (iii) the maximum antenna gain permitted for devices in the band 5725 - 5825 MHz shall 
comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (iv) Users should
also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and 
that these radars could cause interference and/or damage to LE-LAN devices.
Exposure of humans to RF fields (RSS-102)
The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada limits for the general population; consult 
Safety Code 6, obtainable from Health Canada’s Web site at http://www.hc-sc.gc.ca/
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding 
IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/ RSS with the device 
transmitting at its highest certified power level in all tested frequency band without distance attaching away from the body. Non-compliance with 
the above restrictions may result in violation of FCC RF exposure guidelines.

Conformité des appareils de radiocommunication aux limites d’exposition humaine aux radiofréquences (CNR-102)
L’ordinateur utilise des antennes intégrales à faible gain qui n’émettent pas un champ électromagnétique supérieur aux normes imposées par 
Santé Canada pour la population.
Consultez le Code de sécurité 6 sur le site Internet de Santé Canada à l’adresse suivante: http://www.hc-sc.gc.ca/ L’énergie émise par les 
antennes reliées aux cartes sans fil respecte la limite d’exposition aux radiofréquences telle que définie par Industrie Canada dans la clause 4.1 
du document CNR-102, version 5. Tests DAS sont effectués en utilisant les positions recommandées par la FCC/CNR avec le téléphone émet à 
la puissance certifiée maximale dans toutes les bandes de fréquences testées sans distance attacher loin du corps. Non-respect des restrictions 
ci-dessus peut entraîner une violation des directives de la FCC/CNR.

DECLARATION OF CONFORMITY

Hereby, Zound Industries International AB, declares that this product is in compliance with the

essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU 

and the RoHS directive 2011/65/EU.

For the declaration of conformity, visit this website: 

http://www.marshallheadphones.com

Summary of Contents for 04091912


































Reviews: