Marsh Rain Cell Installation And Operation Manual Download Page 2

Page 2

1.1 Preface

Please read and follow this operating manual in order to achieve a long service life of the
unit. Please follow the installation manual when installing and commissioning the unit. The
product has been tested at our works. This means that it has been delivered free from
defects. However, in case of a failure during operation, please see chapter 2.6.

1.2 Warranty (excerpt)

The warranty period is 24 months from the date of purchase of the product.
Within the guarantee period, we will eliminate functional faults free of charge which are
due to manufacture or material defects. These are failures which occur despite proper
connection, proper handling and due consideration given to the operating and installation
manual.

„Please see the valid warranty regulations in our current general Terms & Conditions“.

1.3 General notes

This unit has to be installed in accordance with the technical guidelines
such e.g. BS EN 1717!

• The user is responsible for the following actions:

- of proper installation
- To avoid risks due to improper operation.

• The  unit  has  been designed solely for use:

- at 230 V, 50 Hz AC voltage,
- in rain water harvesting systems,
- for  mains water supply to the storage tank,
- up to a water temperature of 35° C,
- In the vicinity of residential, trade and industrial areas as well as small

sized  companies.

• The following kinds of operation are prohibited::

- the pumping of polluted or contaminated sewage water,
- the  pumping of water with acid content, as well as generally corrosive

liquids,

- the  pumping of water with a temperature higher than 35° C.
- the pumping of flammable and / or explosive media,
- Installation in frost-prone environment
- the operation in a dry state.

Summary of Contents for Rain Cell













Reviews: