marsden M-550BT, User Manual

Page: 8 / 15

show
.
3. The person being weighed can now stand on the scale. Their weight reading will
hold and remain on the display.
4. To return the display back to zero, the HOLD/BMI button can either be pressed or
the individual being weighed can step off the scale.
TARE
1. The ZERO/TARE key can be used to remove any unwanted weight from the scale
’s
display. For example, you may want to remove the weight of someone’s shoes
from the reading, to leave only the person’s weight showing. To do this, place the
shoes on the scale and press the ZERO/TARE key once.
The weight of the shoes will then be zeroed off.
2. Weigh the individual as normal.
3. Remove the shoes and press ZERO/TARE again to cancel the Tare value and
return the scale to zero.
BMI
1. After the patient stands on the scale, press and hold the HOLD/BMI key for three
seconds. The scale will enter BMI mode.
2. The display will show the last inputted height.
3. Press the HOLD/BMI button to decrease the height and ZERO/TARE to increase
the height.
4. When the correct height is showing on the display, press the ON/OFF button.
5. BMI will automatically be calculated and the display will show weight and BMI in
rotation.
6. Press ON/OFF to disable the BMI function.
Setting the Bluetooth Function
Please note: Marsden does not supply software for receiving data from the scale. These
instructions should be followed when you are connecting to a system or device configured
to work with Marsden Bluetooth scales.
1. Press
and hold ZERO/TARE for three seconds. The display will show ‘SETUP’.
2. Press and hold HOLD/BMI
until the display shows ‘BLUET’.
3. Press ZERO/TARE to enter Bluetooth setting mode.
4.
Press HOLD/BMI to toggle between ‘on’ (enabled) and ‘off’ (disabled).
5. Press ZERO/TARE to confirm.
6. Press HOLD/BMI twice, and then ZERO/TARE once to return to normal weighing
mode.
Page 8