background image

2.2 COUNTING FUNCTION 
 

1)

 

To count items on the scale, first place a sample quantity on the scale. Switch the 
indicator to count mode by pressing SET and ON/ZERO key at the same time. 

2)

 

The display shows ’PCS’. Press ON/ZERO to confirm.

 

3)

 

Press SET to change digit and Tare to change the value. 

4)

 

To confirm the amount, press ON/ZERO and remove the items. 

5)

 

Place the items on the weighing pan to resume count. 

6)

 

To return to normal weighing mode, place the original sample on the scale. Press 
the SET and ON/ZERO key. The scale will show PCS Y. Press the Tare key to 
change this to PCS N. Press ON/Zero to confirm. 

 

 

2.3 SWITCHING UNITS 
 

1)

 

To switch the weighing units of the scale from kg to lb, hold down the TARE key. 

 

 

2.4 SETTING THE ALARM 
 

1)

 

To enter the alarm mode, press the SET and ON/ZERO keys/ 

2)

 

The display will show rAng. Press ON/ZERO to confirm. 

3)

 

To set the lower limit press SET to change digit and TARE to change value. 
Confirm the lower limit by pressing ON/ZERO. 

4)

 

Set the upper limit by using SET and TARE. Press ON/ZERO to confirm.  

5)

 

The LED display will show until the target weight is reached. The alarm will sound 
when the target is reached.  

6)

 

To remove the target weight. Press the SET and ON/ZERO keys and the display 
will show rAng. Press ON/ZERO three times to turn the alarm off.

 

 

 
 
 
 
 
 
 
 
 
 

Page 8 

Summary of Contents for B-100










Reviews: