1
1
2
2
3
3
4
4
A
A
B
B
C
C
D
D
Parts List
DESCRIPTION
QTY
ITEM
Antenna
1
1
Ground plate
1
2
MOUNT
1
3
NC #8 x 3/8" Philips Flat Head Screw
4
4
U-Bolt M8
2
5
Hex Nut M8
4
6
Flat Washer for M8
4
7
Lock Washer for M8
4
8
PAY ATTENTION
If edge A of mount is near connector -
connector will be farther from pole.
If edge B of mount is near connector -
connector will be closer to pole.
FIG. 1
PAY ATTENTION
Space C between ground plate item 2 & pole
depends on U-bolts' item 5 position on pole.
Space C may be 0.
FIG. 2
CHNG/REV
DESCRIPTION
ECN No.
DATE
APPROVED
DRAWN
MOUNTING INSTRUCTION FOR ANTENNA MA-WO-UWB
WITH GROUND PLANE MG-370; MG-400 & MOUNT
1. Remove mount item 3 from antenna. (Screws of mount won't be used any more.)
2. Adjust ground plate item 2 with base of antenna so connector passes thru window
in ground plate. Close mount & ground plate to antenna with items 4 (locktite
recommended). (FIG. 1).
3. Put U-bolts item 5 on the pole. Adjust mount item 3 with U-bolts (FIG. 2).
4. Close U-bolts with fasteners items 6, 7, 8. Tighten nuts item 6 so they hold antenna.
(Don't tighten finally.)
5. Adjust antenna as desirable. Evenly tighten nuts item 6 finally.
Recommended fastening torque for each nut:
10 N*m (100 kg*cm; 87 lb*in).
C
POLE
A
B
3
4
2
CONNECTOR
1
5
6
7
8
POLE
5
2
5
6
7
8
3
