Heat Controller
IR Wireless Thermostat
- User Manual
Note: In order to extend batteries
'
life, when the control effect is not
negatively affected, it is suggested to set C2 (automatic control
signal sending cycle) as 20 minutes. (The wireless thermostat
will send the latest control signal to PTAC unit many times
automatically in order to make sure the receiver has
successfully received the command. If someone stands in front
of the sending window, the IR signal may fail to be
received, so
the design initiates
signal sending more than once. The more
frequent
the
sending, the more
the power consumption will be.)
2. Thermostat
installation
Safety notice
■
Installation location shall be far away from high temperature or
direct sunlight. Otherwise, the wireless thermostat life would be
shortened. It may also cause battery leakage contamination or
explosion under high temperature!
■
Please read the safety notice carefully before installation
.
■
Safety notice described below must be observed.
■
Meaning of various parts:
■
After installation
process
is
completed
,
please
confirm
there
is
no
abnormal
phenomenon
in
trial
run
.
The
instruction
manual
shall
be
handed
to
customer
for
storage
.
!
Warning
:
!
Notice
:
The mark indicates that any improper operation
may cause casualties or severe injury.
The mark indicates that any improper operation
may cause personnel injury or property damage.
11
