USER SERVICING INSTRUCTIONS
a) Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of attachment
plug towards blades.
c) Remove fuse carefully. Insert the tip of your tool into fuse slot (close
with the terminal), then pry the fuse gradually and slowly, but not
overexert. If you feel tight, you can try it at several times and pry the
fuse little by little. When one side of the fuse has been pry, then you
can remove the fuse out entirely.
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e) Close fuse cover. Slide closed the fuse access cover on top of at
-
tachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge. Rinse to remove soap film with
clean water.
3. Be sure not to prevent water or other liquid from entering the motor.
RULES FOR OPERATION
1. Never insert fingers, pencils, or any other object through the grille when fan is running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.
Owner’s Manual -
42” Plastic Oscillating Tower Fan
6
