![background image](http://html1.mh-extra.com/html/mars/comfort-aire-fp-1430dto-mbl/comfort-aire-fp-1430dto-mbl_owners-manual_1730582002.webp)
Owner’s Manual -
Metal Oscillating Pedestal Fan
2
OVERVIEW OF FUNCTIONS
1. Fan grill
2. Fan blades
3. Motor housing
4. Oscillation button
5. Speed dial
6. Fan/stand attachment bolt
7. Angle-adjustment knob
8. Power cord and plug
9. Height lock
10. Standing pipe
11. Base
TECHNICAL DETAILS
Rated voltage: 120V~60Hz
Rated power: 50W
Model:14” Pedestal
FP-1430DTO-MBL
FP-1430DTO-MBR
FP-1430DTO-MCH
Model:16” Pedestal
FP-1630DTO-MBL
FP-1630DTO-MBR
FP-1630DTO-MCH
Model:18” Pedestal
FP-1830DTO-MBL
FP-1830DTO-MBR
FP-1830DTO-MCH
IMPORTANT SAFETY MEASURES
Please ensure that the voltage of the fan corresponds to the supply voltage.
- Use the fan only for the purpose(s) defined in the user guide.
- Never insert your fingers, pencils or other objects through the fan cage during operation.
- Switch the fan off before moving or cleaning.
- The fan should be set up on a stable and level surface to avoid being knocked over.
- Do not expose the fan to excessive heat or humidity, to prevent damage to the electrical components.
- Do not immerse in any form of liquid.
- It is not reccommended to expose babies and the elderly to a continuous stream of cold air.
- The fan should be kept out of reach of children.
- Ensure that the powercord does not get caught beneath the device, in drawers, behind shelves etc.
- Do not run the powercord under carpets, rugs, etc.
- Ensure the powercord is kept away form busy areas to avoid anyone tripping over it.
- Do not use if the device or powercord becomes damaged. Take it to an electrician for repair.
- For indoors use only.
SETTING UP THE FAN
- Remove the base nut from the standing pipe. And then insert the standing pipe into the hole of base, put the
heavy base under the base. Fit the base nut back to the standing pipe and screw it on firmly. See the picture
of “OVERVIEW OF FUNCTIONS”
- Remove the 4pcs screws from the motor.
- Fit the rear fan grill onto the motor. Make sure that the 4 holes on the motor match the 4 holes on the rear
fan grill. Fit the 4pcs screws and tighten the screws.
- Install the blade in correct orientation for proper air flow on the motor shaft and carefully tighten the screw.
- Fit the front fan grill onto the rear cage and attach them together using the metal clips.
To obtain the best performance of this fan, please read these instructions carefully before using.
We also recommend keeping the instructions for future reference.