Owner’s Manual -
SVH 09/12/18/24 Series
8
Unit
Specifications
and Featur
es
Page 8
For a detailed explanation of each function,
refer to the
Remote Control Manual.
Other Features
•
•
Auto-Restart
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
•
Anti-mildew (some units)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
•
Louver Angle Memory(some units)
When turning on your unit, the louver will
automatically resume its former angle.
•
Refrigerant Leakage Detection (some
units)
The indoor unit will automatically display “EC”
For a detailed explanation of your unit’s
advanced functionality (such as TURBO
mode and its self-cleaning functions),
refer to the
Remote Control Manual.
The “timer” indicator light turns off and
the “run” indicator light flashes 7 times
when the unit detects refrigerant leakage.
Air Filter Reminders (some units)
Air Filter Cleaning Reminder
After 240 hours of use, the “run” &
“timer” indicator lamps on the indoor
unit will flash simultaneously and the
display window on the indoor unit will
flash “CL” (if applicable). This is a
reminder to clean your filter. After 15
seconds, the unit will revert to its
previous display.
To reset the reminder, press the LED
button on your remote control 4 times,
or press the
MANUAL CONTROL
b
u
tton
3
times
.
If you
don’t
reset the reminder,
the “CL”, “run” & “timer” indicator
lamps will flash again when you restart
the unit.
Air Filter Replacement Reminder
After 2,880 hours of use, the “run” &
“timer” indicator lamps will flash
simultaneously 10 times, then remain on
for five seconds,and the display window
on the indoor unit will flash “nF”(if
applicable). This is a reminder to replace
your filter. After that, the unit will revert
to its previous display.
To reset the reminder, press the LED
button on your remote control 4 times,
or press the
MANUAL CONTROL
b
u
tton 3
times.
If you don’t reset the reminder, the
“nF”,
“run” & “timer” indicator lamps will
flash again when you restart the unit.
