Remote Control Manual - A
-VMH09,12,18,24CU-1
5
MODE
FAN
TEMP
SLEEP
ON/OFF
SILENCE
FP
TIMER
ON
TIMER
OFF
1
2
4
3
8
9
7
5
6
10
12
11
13
14
7
9
8
TIMER ON Button
Press this button to initiate the auto-on time
sequence. Each press will increase the auto-timed
setting in 30 minutes increments. When the setting
time displays 10.0, each press will increase the
auto-timed setting 60 minutes increments.
To cancel the auto-timed program, simply adjust
the auto-on time to 0.0.
Operation of buttons
SWING DIRECT
SILENCE/FP Button
•
Active/Disable SILENCE function. If
pushing
more than 2 seconds, the 'FP' function will be
activated, pushing more than 2 seconds again
to disable.
•
When the Silence function is activated, the
compressor will operate at low frequency and
the indoor unit will bring
a
faint breeze, which
will reduce the noise to the lowest level and
create a quiet and comfortable room for you.
Due to low frequency operation of
compressor, it may result in insufficient
cooling
and heating capacity.
•
The 'FP' function can only be activated during
the heating operation (only when the setting
mode is HEAT). The unit will operate at a
setting temperature of 46°F. The display
window of indoor unit will display 'FP'. Press
the buttons of ON/OFF, SLEEP, FP, MODE,
FAN SPEED, UP or DOWN while operating
will cancel the 'FP function.
LED FOLLOW
ME
TURBO SELF
CLEAN
UP Button
( )
Push this button to increase the indoor temperature
setting in 1
o
F increments to 86
o
F.
DOWN Button
( )
Push this button to decrease the indoor temperature
setting in 1
o
F increments to 62
o
F.
NOTE
:
Temperature cont
r
ol is not available
in Fan
mode.
NOTE:
Press and hold
UP
and
DOWN
buttons
together for 3 seconds
to
alternate the temper-ature
display between the
O
C &
O
F scale.
