MARS COMMERCE Ice-40, Installation Manual, Page: 37 / 44

ICE-­‐40
INSTALLATION MANUAL
Page 37
10.14 RECEIVE CREDIT PARS PARAMETERS (PCREF)
By sending this command to ICE-40 you receive SMS message with all currently programmed
credit parse parameters (CREF, CVODA…):
;PCREF;
10.15 RECEIVE ALL CLIP PARAMETERS (PCLP)
By sending this command to ICE-40 you receive SMS message with all currently programmed
CLIP functionality related parameters ( CLPEN, CLPOU, CLPI, CLPx):
;PCLP;
NOTE
User can use ;PCLP=x,y; to limit the number of CLIP numbers to be printed.
x = start number
y = end number
Example
;PCLP=1,10; Prints first 10 CLIP numbers
10.16 RECEIVE INTERCOM CALL GROUPS PARAMATERS
By sending this command to ICE-40 you receive SMS message with all currently programmed
button 1 group parameters ( KPAx, KPBx, KPNx, KP0x, KPTx):
;PKP;
NOTE
User can use ;PKP=x,y; to limit the number of call groups to be printed.
x = start group
y = end group
Example
;Pkp=1, 10; Prints first 10 call groups settings
10.17 RECEIVE TRADE BUTTON PARAMETERS
By sending this command to ICE-40 you receive SMS message with all currently programmed trade
button settings:
;PTB;