BI-AMPLIFIED SYSTEM
In a bi-amplified system, array shading is accomplished by connecting separate amplifier channels to the HF
section of each MG1932 / MG1928. In larger arrays, a single amplifier channel may be used for two adjacent
loudspeakers. Array shading is then accomplished by adjusting the gain of the HF amplifier channels.
For extremely precise control over system performance, it may also be desirable to dedicate an individual
system controller output to each HF amplifier channel.
ARRAY CONFIGURATION SELECTOR (ACS)
Below is an example of applying the ACS in a three-speaker array. In this particular configuration, the ACS on
the top speaker is set at +3 dB, the middle speaker at 0 dB, and the bottom speaker -3 dB.
Please visit www.jblpro.com/tunings for latest versions of our recommended system tunings or call customer
service at Toll Free 1-800-852-5776.
SYSTEM PROCESSOR TUNINGS
15
+3 dB
0 dB
-3 dB
Audience
