Marquant 929-083, Operating Instructions In Original

Page: 40 / 51

EN
40
SAFETY INSTRUCTIoNS
Read the operating instructions carefully before use!
Please retain for future reference.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
WARNING!
• Any use with products heavier than the rated maximum load indicated may result in personal
injury or material damage.
• Do not begin the installation until you have read and understood all the instructions and
warnings contained in this installation sheet. If you have any questions regarding the content,
please contact your local distributor.
• This wall mount bracket was designed to be installed and utilised ONLY as described in these
instructions. Improper installation of this wall mount bracket may cause material damage or
serious injury.
• This wall mount bracket should only be installed by someone with good mechanical ability who
has basic building experience and fully understands these instructions.
• Make sure that the wall can support the combined weight of the mount bracket and the
equipment it is attached to.
• Mounting on wood studs: make sure that mounting screws are anchored at the centre of the
studs. The use of a wall stud finder is recommended.
• Always use assistance or mechanical lifting equipment to lift and position the wall mount
bracket.
• Tighten screws firmly, but do not overtighten. Overtightening screws may cause damage to the
wall mount bracket thereby greatly reducing its holding force.
• This wall mount bracket is intended for indoor use only. Using this wall mount bracket outdoors
could lead to material damage and personal injury.
TECHNICAL DATA
Maximum weight 20 kg
Fits screen sizes 26”-47”
Operating instructions for
wall mount bracket
ENGLISH