EN
19
AUX mode (3.5 mm line input)
Plug in the audio cable’s 3.5 mm plug. If the product is in Bluetooth or SD mode it will automatically
switch to AUX mode and play music from your phone, computer etc. If the product is switched off,
press the power switch. The audio cable’s 3.5 mm plug is detected automatically when the product is
switched on.
Charging the battery
Connect the supplied USB cable to the Micro USB port on the product and to a USB port on a power
source to charge the product. The red status lamp goes on during charging and goes off when the
battery is fully charged.
TROUBLESHOOTING
Problem
Action
Bluetooth pairing failed several times.
Press the power switch for 1 second to switch off the
speaker. Wait 5 seconds, switch on the speaker and try
to pair it again.
If the unit asks for a password, enter 0000.
The playback falters or hisses.
Check if there is too big a gap between the units, or if
there is an obstruction in between.
No sound during playback.
Check the volume setting on the speaker.
Check if the sound is switched off, or playback is paused.
No sound in AUX mode.
Check that the audio cable is correctly connected.
The product will not start.
Check the battery.
Summary of Contents for 920-545
Page 20: ......