Marquant 920-475, User Instructions

Page: 28 / 29

EN
28
• Tune the required channel with the [ ] or [ ] buttons.
• Press the [ENTER] button to confirm.
• Setting preset stations
• Press the required number button ([1/4], [2/5] or [3/6]).
• Tune the required channel with the [
] or [ ] buttons.
• Press the [ENTER] button to confirm.
ADDITIONAL SETTINGS
Setting the clock
When you are not listening to the FM radio the appliance can be used as a clock.
• When the radio is on, press the [STAND BY] button to show the time on the display and keep the
[MEMO] pressed to set the time.
• When the hour number flashes, press [ or [ ] repreatedly, or keep the button pressed, to
go to the next number.
• Press the [MEMO] button again to set the minutes.
• When the minutes number flashes, press [
or [ ] repreatedly, or keep the button pressed,
to go to the next number.
• Press the [ENTER] button to confirm.
Standby mode
When the clock has been set, you can use the appliance as a clock. While listening to the radio, you
can press the [STAND BY] button to show the time on the display.
SETTING THE ALARM
When the radio is on, you can press the [STAND BY] button to show the time on the display.
• Press the [ALARM] button to set the alarm.
• When the hour number flashes, press [
or [ ] repreatedly, or keep the button pressed, until
the required time is shown.
• Press the [ALARM] button again to set the minutes.
• When the minutes number flashes, press [
or [ ] repreatedly, or keep the button pressed,
until the required time is shown.
Setting the alarm mode
When you have set the time for the alarm, press the [ALARM] button again to select the required
alarm mode. Select Buzzer or Radio with the [
] or [ ] buttons.
If you have selected Buzzer, confirm with [ENTER].
If you have selected Radio, press the [ALARM] button and the buttons [
] or [ ] to select the ra-
dio station (P1 to P6). Press the [ALARM] button and the buttons [ ] or [ ] to select the required
alarm volume (L00 to L32).