EN
35
SAFETY INSTRUcTIoNS
Read the operating instructions carefully before use!
Please retain for future reference
• Read the operating instructions carefully in respect of electrical wiring
If connected incorrectly, the car stereo will be damaged
• If possible, the stereo should be installed by a professional
• Do not connect the power cable until all other connections to the car
stereo have been made
• Insulate all exposed cables in order to avoid short circuiting
• Once installation is complete, all loose cables should be attached
• The car stereo is designed to be powered by a 12-15 V system with negative
earth Check that your car has such an electrical system
• Connect the car stereo in accordance with the wiring diagram If you do not,
it will not work as intended and damage may occur
• The speakers must be connected correctly, otherwise there is a danger
that both the amplifier and the speakers will be damaged
• If the aerial cable (BLUE) is earthed or is connected incorrectly,
the car stereo may break or be impossible to start
• If the power cable (YELLOW) is earthed or is connected incorrectly,
the car stereo may break or be impossible to turn on or off
• If the memory cable (RED) is earthed or is connected incorrectly, the car stereo
may break or be impossible to turn on or off
TEcHNIcAL DATA
FM receiver
Frequency range
875-108 MHz
Medium wave
107 MHz ±03%
Signal/noise ratio
50 dB
Radio sensitivity
10 dB
AM receiver
Frequency range
522–1,620 MHz
Intermediate frequency
455 MHz ±5%
Signal/noise ratio
45 dB
Radio sensitivity
40 dB
Operating instructions for
car stereo
ENGLISH
Summary of Contents for 610-152
Page 45: ......
