M6 - Mx computer System | V2 | Installation
7.
Wait for the system to reboot.
8.
Follow the same steps as for a first installation, starting from when the start screen with the Mx
computer system information appears.
Installing the System
Marport technicians or dealers need to connect the different components of the system.
Procedure
1.
Check that you have all the items needed for the installation (See
on page 11)
2.
Install the hydrophones and their cables, or find the cables from hydrophones that have already
been installed.
3.
Route the hydrophone cables toward the junction boxes.
4.
Put the receivers in a dry and clean area, as close as possible to the hydrophones. If the
receivers are in a closed environment, make sure it is enough ventilated and that the ambient
temperature does not exceed 55 °C (131 °F).
32
