SIDE PANELS
The volume con-
trol is located on
the right, underside panel of the TSC-330. Sliding
the volume control toward the wide end of the arrow
indicator will increase the volume level. Sliding this
control to the opposite or pointed end of the arrow will
decrease the volume level.
Located on the
left, underside
panel is a combination slide control. When operating
the TSC-330 in the WHITE SOUND mode, this control
is used to move between Rain and Waterfall creating
a wide variation of sound between the two settings.
This control also functions as the tone control for the
SURF setting. Sliding the control toward the wide end
of the arrow will increase the bass response of the
Surf; moving it in the opposite direction will add more
treble or “splash” to the waves.
Some minor experimenting with sound selection and
control positions will almost always produce the sound
best suited to your noise masking requirements. Who
in a tropical paradise.
VOL.
GENERAL INFORMATION
Congratulations on your purchase of the Marsona
®
Conditioners available today. Taking a few moments
to read this information will help you become familiar
with its operation and use.
The TSC-330 utilizes solid state technology to create
“white sound” emulating Rain/Waterfall and Surf to
help mask or greatly reduce the effects of unwanted,
uncontrollable noise. Where extreme quiet is prevalent,
and the slightest noise can be disturbing, the TSC-330
can contribute a level of comfortable, ambient sound.
Compact in size for travel convenience, and big on
sound, the TSC-330 is ideal for the person on the
move, helping create a familiar sound environment at
home or on the road.
OPERATING THE TSC-330
BACK PANEL
small recessed area
containing a power
input jack and a three
position slide control.
First insert the 2.5mm
x 5.5mm plug of the transformer cord into the power
input jack; then plug the transformer into an appropriate
household type electrical outlet. Located to the right of
the power input jack is a three position sound selector,
on/off slide control. As indicated by the legend, the
center position is OFF. Sliding the switch control button
to the left will activate the WHITE SOUND, sliding it to
the right will activate the SURF sound. You may not
notice an immediate difference as you change from
White Sound to Surf because the sound source for
these settings is the same. After a few seconds you
will notice the soft modulation of gentle waves when
the Surf setting is selected. The White Sound setting
produces a continual, adjustable range of sound for
greater noise masking requirements.
PO WER INPUT
WHITE SOUND
OFF
SURF
RAI N
WATERF ALL
