Maro D'Italia DI600, Operating Instructions Manual

Page: 8 / 31

Before installation
1. Do not put the product in a room where humidity can exceed 90% RH (relative humidity).
2. Only use specified power supply (AC 220V–240V). Other power supply may cause product failure or product damage.
3. Do not apply power or supply water to the unit until the installation process is complete.
4. The power voltage amounts to 220V–240V. The Max power is 1300W. Use wiring and electrical outlet appropriate for th is level of
power.
5. Use water supply with static pressure of 0.7kgf/cm²–7.5 kgf/cm² (0.07 MPa–0.75 MPa).
6. The temperature of the main water supply should be defined from 3°C–35°C (37.4°F–95°F).
When using electrical products, especially when children are present, basic safety precautions should always be followed, including the
following:
TO REDUCE THE RISK OF ELECTROCUTION:
1. Do not place or store this appliance anywhere where it can fall or be pulled into a bath or sink.
2. If the product falls into the water, please unplug the power supply immediately and do not touch it directly with your hands.
3. Do not reach for the product that has fallen into water. Unplug it immediately.
4. Do not use the product while taking a shower.
WARNING: To reduce the risk of low-temperature burns, electric shocks, fire or personal injuries:
1. Close supervision is necessary when this product is used by children or persons requiring general assistance.
2. Do not leave children unattended in the room when the product is positioned. Kids should not play with the product.
3. Adjust the temperature of the toilet seat for the elderly, handicapped and people with sensitive skin.
WARNING
Please clean any residual mud, sand and other debris in the bathroom before installation; otherwise you may risk product damage.