5
value exceeds limit.
15. There will be “-LO-” sign displayed if the temperature/
humidity sensor is not well connected. At this time,
please open the back cover and re-install the sensor.
Until the correct measurement value is displayed.
Software installation
1. Put the CD into the CD-ROM, there will be installation
interface pop-up after a moment. You can install the
software to your PC accordingly.
2. After the software is installed, keep the CD in the
CD-ROM and connect the datalogger with the PC by
the USB cable. Then, there will be a USB Driver
installation window pop-up. Follow with the clew, select
the path of CD driver and you will finish the USB driver
installation very soon.
Software application
The Datalogger USB software is a program for collecting
data from the DATA LOGGER when it is connected to a PC
or notebook computer. The data may be displayed
graphically, as Excel or similar programs. The major
functions are all listed in the main window.
System Required:
Windows 2000 or Windows XP or Vista
Minimum Hardware Required:
PC or NoteBook with Pentium 90MHz or higher 32 MB
RAM ;
At least 7 MB byte hard disk space available to install HT
Datalogger USB software.
Recommended display resolution 1024X768 with High
