© MARMITEK
6
Frequently asked questions (FAQs)
Bad (or no) image and sound
•
Ensure that the CAT5e/6 cables are connected correctly between the
MegaView60/61 transmitter and receiver (CAT5e-1 to CAT5e-1 and CAT5e-2 to
CAT5e-2).
•
Check if the A/V device is switched on.
•
Use only CAT5e/CAT6 cable as specified in chapter 3 (CAT5e Cable
Requirements).
•
Check if the CAT5e/CAT6 cable provides a solid connection (no cable faults).
•
Check if the RJ-45 has been connected according to the EIA/TIA T568B standard.
Please refer to attachment page XX
•
Please ensure that the maximum cable length is not exceeded.
•
Install your system as far away from any RF sources (wireless devices) as
possible.
•
Set a low resolution on your HDMI source. The CAT5e/6 cable used probably
cannot deal with the higher resolution bandwidth.
Do you have any questions that are not answered above?
Please check
www.marmitek.com
.
Technical specifications
Resolution
Supported HDTV Resolutions
480p, 576i, 576p, 720p, 1080i, 1080p
Single link Bit Rate (max)
1.65 Gbps
Supported Standards HDMI
DVI, HDCP
Transmitter
HDMI input (19-pin female)
1 HDMI
Video signal input
0.5
–
1.0V p-p
DDC signal input
5V p-p
Receiver
HDMI output (19-pin female)
1 HDMI
Video output
HDMI V1.2a
CAT5e/6 cable length (max.)
60m for 480p and 30m for 1080p (MegaView60)
Transmitter/Receiver
Dimensions (H x B x D)
45mm x 25mm x 81mm
Weight
246g
Environment
Ambient temperature
+0 to +70° C
Ambient humidity
10% to 85%
Power
Input
100-240VAC @50-60Hz
Output
5VDC 2A
Specifications may be modified without prior notice.