manualshive.com logo in svg

Marmitek IP EYE ANYWHERE - QUICK, Installation Manual

Share
Download
Marmitek IP EYE ANYWHERE - QUICK Installation Manual Download Page 16

2.2  Connecting the Camera to LAN/WLAN 

Use the provided Ethernet cable to 
connect the Marmitek IP Eye 
Anywhere camera to your local area 
network (LAN). 

When you connect the AC power 
adapter, the camera is powered on 
automatically. You can verify the 
power status from the Power LED on 
the front panel of the camera. 

Once connected, the Link LED starts 
flashing green light and the camera is 
on standby and ready for use now. 

 

 

If you have the  IEA11 or 21 and use a 
wireless network in your application 
environment, you need to attach the 
included external antenna to the 
camera. 

When the camera is powered on, the 
camera will automatically search any 
access point with “default” SSID. 

 

Connecting the Ethernet Cable

Connecting the External Antenna

 
NOTE

  If the camera cannot connect to your wireless network, you 

need to install the camera in LAN and proceed with WLAN 
settings. 

IPEyeAnywhere 241 / 341

TM

15

Summary of Contents for IP EYE ANYWHERE - QUICK











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands