5
The
Buddy
must be paired with your Solar to operate. When first
powered up the display will state
Not Bound
.
Follow this simple pairing procedure to join with the Solar
1. Press and hold both
B
and
Boost
buttons on the
Buddy
for 5 seconds,
the display will show:
Install Mode
58s Unbound
2. During the 60 second countdown move to the Solar , press
any button to switch on the backlight. Immediately press and hold
button B on the Solar for 5 seconds then release.
3. The Solar display will show:
Pairing with Device...
When the pairing is successful the Solar will show:
Pairing Successful
The
Buddy
will display:
Install Mode
05s Bound
If the pairing fails the
Buddy
display will time out and again show:
Not Bound
Repeat the procedure until the pairing is achieved.
4. Finally, locate the unit in a convenient position.
Pairing to the Solar
The Buddy will allow 1 minute to pair before
timing out. The countdown is shown
.
The Buddy is fully paired after
5 seconds.
