Calibration
Calibration adjustment is permanent and
should only be performed using accurate
calibration weights that match the
requirements for your scale (see the chart on
back). Do not use coins or other household
items to calibrate.
1.
Prepare the 100g weight.
2.
Find a flat and level surface to perform calibration
and let the scale adjust to room temperature.
3.
Press
ON/OFF
to turn the scale on and wait for the
scale to stabilize.
4.
Press the
CAL
key. The display will show ‘CAL’.
5.
Make sure nothing is on the platform then press
CAL
to confirm the zero point.
6.
The display will then flash the required calibration
weight.
7.
Place the required calibration weight on the center
of the platform.
8.
The display will show ‘PASS’ then return to normal
weighing mode. You may
now turn the scale off or
continue weighing.
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON/OFF
TARE
MODE
CAL
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON/OFF
TARE
MODE
CAL
Radio Frequency
Interference
Unlevel Surfaces
High Humidity
Air Currents
Vibration
Extreme Temps
ON/OFF
TARE
MODE
CAL
Summary of Contents for RELOADR RMM-100-005
Page 1: ...MARKSMAN USER GUIDE...
