background image

1. Press the LOCK button to
increase sensitivity by 1 step 
(1 chirp)
2. Press the UNLOCK button to
decrease the sensitivity by 1 step 
(1 chirp)
3. Rap on the vehicle body panels
and glass to achieve the proper
setting. 
Note: If you hear 2 chirps while
making an adjustment, you have
reached the max setting.

1. Press and hold the LOCK and
UNLOCK buttons together for 2
seconds. You will hear 2 long
siren/horn chirp. You are now in the
“Pre-warning” trigger Shock Sensor
test mode. 
2. Follow the procedures in Step 4 to
adjust the “Pre-warning”sensitivity. 

Step 5

To exit the shock sensor test mode,
turn ignition “On” and 3 long chirps
will confirm exit of the “Shock
Sensor” test mode.
Note: 30 seconds of inactivity will
force exit of the shock sensor test
mode. 

Step 6

Shock Sensor Testing and Adjustment

Increase

Decrease

Step 4

Owners Manual

A. Transmitter Operation

B. Alarm Status Indicators

LED Indications

LED is off = Alarm is disarmed.
LED is flashing normal = Alarm is armed.
LED is flashing fast = Automatic Arming Countdown.
LED is on (solid) = Valet Mode.
LED flashes twice then pauses = Tamper  warning, alarm was triggered by an
open trunk or hood.
LED flashes three times then pauses = Tamper warning, alarm was  triggered
by an open door.
LED flashes four times then pauses = Tamper warning, alarm was triggered by
the shock sensor.
LED flashes five times then pauses = Tamper warning, alarm was triggered by
voltage from the ignition switch turning on.

Chirp Indications

One siren chirp = Security system is armed.
Two siren chirps = Security is disarmed.
Four chirps = Tamper disarm warning, alarm was previously triggered.
Two sets of two chirps = Stage 1 of progressive car finder
Two sets of three chirps = Stage 2 of progressive car finder
Six chirps = Stage 3 of progressive car finder

Parking Light Indications

Parking lights flash one time upon arming = Security system is armed.

Parking lights flash two times upon disarming = Security system is disarmed.
Parking lights flash three times upon disarming = Tamper disarm warning,
alarm was previously triggered.
Parking lights flash three times while armed = Stage 1 and 2 of progressive car
finder
Parking lights flash six times while armed = Stage 3 of progressive car finder

Lock/ Arm
Car-Finder

Un-Lock/
Disarm

Panic

CH#3 
(Trunk)

2nd
System

Summary of Contents for Extreme X3













Reviews: