background image

SAFETY INFORMATION

CAUTION TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE ANY 
COVER SCREWS, NO USER SERVICEABLE PARTS INSIDE, REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that there are important operating maintenance instructions in 
the literature accompanying this unit. 

IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE.

Take note of the following safety information which appears on the back of the TV.

present within this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is 

Keep these instructions

Do not use this TV near water.

Clean only with a slightly damp cloth.

Do not block any ventilation openings.

Install in accordance with the supplied Quick Start Guide and this User Guide.

Protect the power chord from being walked on or pinched, particularly at plugs, and the

point where it exits from the TV.

Do not allow the power chord to overhang the edge of a table.

Unplug this TV during lightening storms or when unused for long periods of time.

WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT

EXPOSE THIS TV TO RAIN OR MOISTURE. THE TV MUST NOT BE EXPOSED

TO DRIPPING AND SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS

SHOULD BE PLACED ON THE TV.

NOTE:

No naked flames such as candles should be placed on the TV.

3

Summary of Contents for MS42102DVB-LED











































Reviews: