39
Troubleshooting
When operating with different protocols you may have
problems in each mode at the same time. – We recommend
reducing the number of protocols. Deactivate protocols
in the locomotive decoder that are not needed and also
deactivate if possible protocols in the central controller that
are not needed.
The locomotive jerks and falters – Check the CV setting for
motor variations, change if necessary, or carry out a reset to
the factory settings.
The locomotive does not run in analog. – The automatic
analog recognition is deactivated and must be activated
again (see CV table).
The locomotive (decoder) does not react. – Check the wiring
and the solder joints, redo if necessary. Check the connec-
tor for the decoder to make sure it has permanent contact
and check the way it was installed.
mfx/DCC operation: Locomotives standing on the layout start
running suddenly during mfx registration. – Deactivate the
automatic analog recognition on these locomotives.
The locomotive does not run. – The function “open doors /
close doors” is still active. Turn off the function “close doo-
rs”; after the sound ends the locomotive will run according
to the ABV that has been set.
Disposing
Products marked with a trash container
with a line through it may not be disposed of
at the end of their useful life in the normal
household trash. They must be taken to a
collection point for the recycling of electrical
and electronic devices. There is a symbol on
the product, the operating instructions, or the packaging to
this effect. The materials in these items can be used again
according to this marking. By reusing old devices, materially
recycling, or recycling in some other form of old devices
such as these you make an important contribution to the
protection of our environment. Please ask your city, town,
community, or county authorities for the location of the
appropriate disposal site.
Warranty
The warranty card included with this product specifies the
warranty conditions.
• Please contact your authorized Märklin dealer for repairs
or contact:
U.S. only:
Wm. K. Walthers Inc.
5601 W. Florist Ave.
Milwaukee, WI 53218
www.maerklin.com/en/imprint.html
GB only
Gebr. Märklin & Cie. GmbH
Reparaturservice
Stuttgarter Str. 55 - 57
73033 Göppingen
Deutschland
Tel: +49 7161 608 222
E-Mail: [email protected]
