marklin 55332, User Manual

Page: 6 / 20

6
Functions
• The mode of operation (mfx, Märklin Motorola, or DCC) is recognized
automatically.
• Possible addresses:
Märklin 01 – 255 / Control Unit 1 – 80, DCC 01 - 9999
• Address set at the factory: (Märklin) 32 / ( DCC) 03
• Mfx technology for the Mobile Station / Central Station.
Name set at factory:
BR 332 255-9
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV)
• Adjustable maximum speed.
• Volume can be changed for the sound effects.
• Setting locomotive parameters (address, acceleration/braking delay,
maximum speed, etc.): with the Control Unit and DCC (CV program -
ming), Mobile Station, or the Central Station.
• Built-in sound effects circuit, can only be used in operation
Märklin Digital, Märklin Systems, or DCC.
• The model is designed for operation on Märklin 1 Gauge track. As the
consumer you assume the risk for operating on other makes of track.
• Minimum radius for operation: 1020 mm / 40-1/6“.
• Only the train control functions and headlight changeover feature are
available in analog operation.
• Note for operation with the Mobile Station:
When there is a continued very high power consumption, the Mobile
Station shuts off completely like a short circuit. In this situation, red-
uce the number of functions and then turn the system on by pressing
the STOP button again.
Safety Notes
• This locomotive is to be used only with an operating system designed
for it (DC power = 18V±, Märklin AC, Märklin Digital, Märklin Systems,
DCC).
• Use only switched mode power supply units and transformers that
are designed for your local power system.
• This locomotive must never be supplied with power from more than
one transformer.
• Pay close attention to the safety notes in the instructions for your
operating system.
• The feeder track must be equipped to prevent interference with
radio and television reception, when the locomotive is to be run in
conventional operation. The 104 770 interference suppression set is
to be used for this purpose.
• The wire used for feeder connections to the track may only be a
maximum of 2 meters / 39 inches long.
• WARNING! Sharp edges and points required for operation.
General Notes
• The operating instructions are a component part of the product and
must therefore be kept as well as transferred along with the product
to others.
• Please see your authorized Märklin dealer for repairs or spare parts.
• http://www.maerklin.com/en/imprint.html
No warranty or damage claims shall be accepted in those cases where parts neither manuf-
actured nor approved by Märklin have been installed in Märklin products or where Märklin
products have been converted in such a way that the non-Märklin parts or the conversion
were causal to the defects and / or damage arising. The burden of presenting evidence and
the burden of proof thereof, that the installation of non-Märklin parts or the conversion in
or of Märklin products was not causal to the defects and / or damage arising, is borne by
the person and / or company responsible for the installation and / or conversion, or by the
customer.