markilux freestanding infrared heater
Information
Page 1: ...markilux freestanding infrared heater Information ...
Page 2: ...g tube technology minimum glare and pleasant light temperature Mobile upright unit for even surfaces For outdoor areas incl about 2 4 m power cable with Schuko plug Important INFORMATION Completely remove the transport protection in the reflector prior to operation Establish connection to the mains supply The house wiring to the power supply must be fused with a circuit breaker of at least 16 A Th...
Page 3: ...he following will be carried out Outside the programming the infrared heater can be switched on for 5 minutes by double clicking the device button signal tone and 1 Signal tone ˋ without timeout 2 Signal tones ˋ 30 minutes operating time 3 Signal tones ˋ 60 minutes operating time 4 Signal tones ˋ 90 minutes operating time Short term heating 2 Maximum infra red radiation intensity infra red radiati...
Page 4: ...ess Is must be replaced when changes dark spots deformations become visible or if the nominal service life has been reached Important NOTE Place the infrared heater on a level surface and connect to the mains supply Activating the programming Press the device button for 5 seconds until you hear a long signal tone 2 sec Programming the timeout 30 min First double click ˋ 30 minutes operating time ˋ...
