Markilux 779 Operation Manual Download Page 3

3

markilux important notes

Important information for the users of markilux awnings

1. Manufacturing number

Every markilux awning was produced individually according to your guidelines and has a fabrication number on it, through which this 

product becomes a unique product identifiable at any time.

2. Marking of important safety instructions

With this triangular warning, notes regarding dangers are 

marked which can result in bad injuries or even death. 

Furthermore it marks important information on the function 

of the awning!

5. Wind resistance class

3. Reading of "Important Instructions" and the "Operating Instructions"

4. Proper use of an awning

With this triangular warning, notes are marked which respond 

to dangers by electric shock resulting in bad injuries or even 

death.

The instructions handed by the authorized markilux specialist must be read before the first awning use. It is important to read all instructions 

for the safety of persons. All instructions are to be stored by the customer and have to be handed over to the new owner in case of an 

eventual transfer of the awning to Third Parties.

0-14°

The awning is a sun protection construction. 

Improper use may lead to significant hazards. 

If the awning inclination is less than 25% = 

14° measured at the horizontal or the awning 

is not extended entirely, then it must not be 

burdened by rainwater. If this is the case, 

there is a risk of the formation of water 

troughs in the awning cover and the awning 

may become damaged or even detached 

from the wall.

Alterations like rebuilding or enlargements 

which are not intended by the manufacturer 

may only be carried out with the markilux 

manufacturers written approval. Additional 

awning burdens by means of object 

attachments or  or rope wearing can result in 

damage or dropping of the awning and are 

therefore not allowed.

Wind resistance class

0

1

2

3

Wind speed V (km/h) maximum values

< 28

28

38

49

Wind speed V (m/s) maximum values

< 7.8

7.8

10.6

13.6

The awning meets the requirements of the above stated wind resistance class. 

Explanation 

see "Handover certificate from the specialist dealer".

 The CE indicates that 

correspondence with the requirements of the applicable European directives is proven. The 

corresponding declarations of performance and EU declarations of conformity can be 

requested through the markilux specialist dealer.

Windwiderstandsklasse 2

markilux 6000, 5010, 3300, 970, 990, 1700, 1710, 

1600, 930, 1300, MX-1 compact, MX-2, MX-3 

710, 730, 740, 893, 8850

wind resistance class 3

markilux 620 tracfix, 770 / 870, 

7800 / 8800

wind resistance class 2 or 3

markilux 625 tracfix (depending on the size), 

776 (depending on the size) / 876 (depending on the size), 

779 (depending on the size) / 879 (depending on the size)

markilux 779 tracfix / 879 tracfix

Operation manual

markilux.com

Summary of Contents for 779















Reviews: