7
markilux.com
1.
Reading the instructions
Read the operating instructions and all the documentation pertaining to the product (handover protocol), important guidelines,
etc.) carefully and completely before using the product.
Attention!
2.
Awning with manual operation
1. Attach the crank-hook into the gear eyelet.
2. Hold the crank rod with one hand on the upper and one hand on the lower
turning handle. During the operating procedure, pull the crank slightly towards
the operator.
3. If the gear eyelet is positioned on the left side (as shown here):
• Extension of the awning cover: Clockwise rotation of the crank.
• Retraction of the awning cover: Counterclockwise rotation of the crank.
• If the gear eyelet is on the right side, the directions of rotation are exactly the
opposite.
4. If the crank is to remain in the gear eyelet, it must be protected against
uncontrolled movements (e.g. when it is windy).
Attention:
Awnings with winding handle have a
transmission end stop to limit the extension travel. It prevents
incorrect coiling of the cover onto the roller. The transmission
end stop must never be approached with force. Shortly before
reaching the end position in the extending direction, the crank
operation should be slowed in a controlled manner in order to
avoid a forced overtravel of the transmission brake. If the
transmission end stop is defective, a coiling of the cover from
below onto the roller during retracting can lead to damage to
the awning cover and the awning frame.
Attention:
In partially extended positions and with flat pitch angles (less than 14°) there is an increased risk of water
collecting on the surface of the cover. The optimum cover tension is achieved when the awning is extended.
markilux 990 / 930
Operation manual
Summary of Contents for 1300
Page 2: ...2 markilux com ...
