Market Forge Industries STEAM-TECH PLUS STP-6E, Owner'S Manual

Page: 28 / 35

6.13
6. MAINTENANCE
ITEM
NO.
FIGURE 6.9 COOKING COMPARTMENT DOOR ASSEMBLY
DESCRIPTION qTY.
PART
NO.
1 DOOR GASKET 1 E91-5286
2 DOOR GASKET MOUNTING PLATE 1 E91-5731
3 DOOR HANDLE 1 E91-5745
4 DOOR INSERT 1 E91-5766
5 DOOR SHELL 1 E91-5729
6 HINGE BEARING, NYLON 2 E08-2702
7 HINGE BRACKET, BOTTOM (SMALLER) 1 E91-5436
8 HINGE BRACKET, TOP (LARGER) 1 E91-5437
9 MAGNET 2 E08-5027
10 MAGNET RETAINER BRACKET 2 E91-5901
11 SPRING 2 E08-4600
12 STRIKER, CAST 1 E09-1608
13 WASHER, NYLON 4 E10-0100
14 6-32 NUT WITH NYLON INSERT, zINC PLATED 2 E08-3838
15 10-32 HEX HEAD MACHINE SCREW, 7/8” LONG, STAINLESS STEEL 4 E08-3488
16 10-32 PHILLIPS FLAT MACHINE SCREW, 1/2” LONG, STAINLESS STEEL 2 E08-3486
17 10-32 SLOTTED TRUSS HEAD MACHINE SCREW, 1/2” LONG, STAINLESS STEEL 6 E10-1764
18 10-32 SLOTTED TRUSS HEAD MACHINE SCREW, 3/4” LONG, STAINLESS STEEL 6 E10-1765
19 10-32 NUT WITH NYLON INSERT, zINC PLATED 4 E08-3841
6.9 DOOR GASKET REPLACEMENT
The cooking compartment door gaskets are made of a silicone
type rubber material, which is very durable, but is subject to
wear during normal daily operation. This gasket may start to
leak which will cause the steamer to malfunction. Should the
gasket begin to leak, it should be replaced as follows:
Open the cooking compartment door.
Remove the 6 screws from the door gasket mounting plate
on the inside of the door.
1.
2.
Remove the door gasket mounting plate and the door gas -
ket.
Install new door gasket ( market Forge part Number 91-
5286 ) into the door.
Refasten the door gasket mounting plate to the inside of
the door using the 6 screws.
NOTE: Remember that the lip on the door gasket mounting
plate must fit into the channel on the inside edge of the gasket
for a proper sea l.
3.
4.
5.
ITEM
NO.
FIGURE 6.10 SINGLE ELECTRIC POWERED STEAM GENERATOR ASSEMBLY
DESCRIPTION qTY.
PART
NO.
1 ELECTRIC SEAM GENERATOR TANK 1 E91-5727
2 ELBOW, 1/8” mNPT TO 1/4” HOSE BARB, BRASS 1 E08-5063
3 ELBOW, 1/8” FNPT TO 1/4” HOSE BARB, BRASS 1 E08-5004
4 GASKET, OBROUND 2 E91-5717
5 HEATER: 208V 1 E08-6485
HEATER: 240V E08-6486
HEATER: 480V E08-6487
6 HEATER GASKET 1 E91-8660
7 HEATER MOUNTING PLATE 1 E91-5721
8 SPRAY NOzzLE 1 E08-5017
9 THERMAL FUSIBLE LINK 1 E91-6693
10 THERMOSTAT, N.O., 193
O
F 1 E10-8105
11 WATER LEVEL PROBE 2 E08-6338
12 1/4-20 NUT WITH NYLON INSERT, STAINLESS STEEL 14 E08-3850
13 1/4” WASHER, STAINLESS STEEL 14 E08-4011