MarkBass CMD SUPER COMBO K1 Owner'S Manual Download Page 2

02

“To be used only 

where the climate

is not tropical”

“The Lightning Flash with arrowhead symbol 

within an equilateral triangle, is intended 

to alert the user to the presence of uninsulated 

“dangerous voltage” within the product enclosure 

that may be of suf�icient magnitude to constitute 

a risk of shock to persons.” 

“The exclamation point within an equilateral 

triangle is intended to alert the user to the 

presence of important operating and 

maintenance (servicing) instructions in the

literature accompanying the product.”

“To be used only 

with altitude 

not exceeding 2000 m” 

MORE INFORMATION

For warranty and service information, please contact your local Markbass distributor (contact information available at www.markbass.it). For more technical information, please visit us at www.markbass.it  and fill out the form on the 

Support page. We hope you enjoy your power amp and use it to make great music!

IMPORTANT SAFETY INSTRUCTIONS

1)    Read these instructions;

2)    Keep these instructions;

3)    Heed all warnings;

4)    Follow all instructions;

5)    Do not use this apparatus near water;

6)    Clean only with dry cloth;

7)    Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions;

8)    Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that  

        produce heat;

9)    Do not defeat the safety purpose of the polarized or ground-type plug. A polarized plug has two blades with one wider than the  

        other. A grounding type plug has two blades and a third grounding prong.

        The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an 

        electrician for replacement of the obsolete outlet;

10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the  point where 

       they exit from the apparatus

11) Only use attachments/accessories specified by the manufacturer;

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

       When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from the tip-over (and Fig 21 DU  

       Tipping Cart Symbol).

13) Unplug this apparatus during lightning storms or when unused for long periods of time;

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as 

       power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been  

       exposed to rain or moisture, does not operate normally, or has been dropped;

15) “WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND  

       OBJECTS FILLED WITH  

        LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS”.

16) TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE  

       AC RECEPTACLE;

17) THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REAMIN READILY ACCESSIBLE.

18) In case of voltage selector make sure the switch on the rear panel is on the correct voltage before connecting it to the AC power,  

       and the fuse is the right value for that voltage (This selector is not available on the 100V version).

       Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you need  

       to change the voltage of the apparatus.

19) “WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR OR WALL IN ACCORDANCE WITH INSTALLATION  

        ISTRUCTION. TIPPING, SHAKING, OR ROCKING THE MACHINE MAY CAUSE INJURY OR DEATH.”

20) “CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF  

       ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN TEH OPERATING INSTRUCTIONS UNLESS  

       YOU ARE QUALIFIED TO DO SO”

PRÉCAUTIONS D’EMPLOI

1)    Lire ces instructions;

2)    Conserver ces instructions;

3)    Suivre tous les conseils d’utilisations;

4)    Suivre toutes les instructions;

5)    Ne pas utiliser cet appareil au bord de l’eau;

6)    Nettoyer uniquement avec un chiffon humide;

7)    Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;

8)    Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui produit de  

        la chaleur;

9)    Ne pas modifier le système de sécurité de la fiche polarisée ou de de la fiche pour les prises de terre. Une fiche polarisée a deux  

        broches, l’une étant plus distante de l’autre. Une fiche pour prise de terre a deux broches et une pointe pour la masse. 

        La broche plus distante et la pointe pour la masse ont été installées pour votre sécurité. Si la fiche fournie de rentre pas dans 

        votre prise de courant consulter un électricien pour la substitution;

10) Protéger le cordon d’alimentation afin qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des fiches, des prises de  

       courant femelles, et des parties qui sortent de l’appareil;

11) Utiliser uniquement les accessoires recommendés par le fabricant;

12) Utilisez uniquement avec le chariot, le socle, le trépied, le support ou la table spécifiés par le fabricant ou vendu avec l’appareil. 

        Lorsque vous utilisez un chariot, soyez prudent lorsque vous déplacez l’ensemble chariot / appareil pour éviter toute blessure du 

        renversement (et la figure 21 DU Tipping panier Symbol).

13) Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;

14) S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la fiche a été    

       endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil, si ce dernier a été exposé à  

       la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;

15) “AVERTISSANT: POUR RÉDUIRE LE RISQUE DU FEU OU DE DÉCHARGE ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU  

       L’HUMIDITÉ ET LES OBJETS REMPLIS DE LIQUIDES; TELS QUE DES VASES, NE DEVRAIENT PAS ÊTRE PLACÉS SUR CET APPAREIL”;

16) POUR DÉCONNECTER COMPLETEMEN L’APPAREIL DU RESEAU D’ALIMENTATION, DÉCONNECTER LE CORDON D’ALIMENTATION  

       DE LA PRISE MURALE;

17) LA PRISE DU RESEAU D’ALIMENTATION DOIT DEMEURER AISEMENT ACCESSIBLE.

18) En cas de sélecteur de tension s'assurer que l'interrupteur sur le panneau arrière est sur   la bonne tension avant de le raccorder à  

       l'alimentation secteur et le fusible est la bonne valeur pour que la tension (Ce sélecteur n'est pas disponible sur la version 100V). 

       S'il vous plaît changer la tension / valeurs de fusibles étiquette située près du sélecteur de tension correspondant aux valeurs /  

       fusibles de tension lorsque vous avez besoin de changer la tension de l'appareil.

19) “AVERTISSEMENT: CET APPAREIL DOIT ÊTRE ASSUJETTI AU PLANCHER OU AU MUR CONFORMÉMENT AUX INSTRUCTIONS  

       D’INSTALLATION. LE FAIT DE L’INCLINER, DE LE BALANCER OU DE L’AGITER PEUT CAUSER DES BLESSURES OU LA MORT.”

20) “ATTENTION: CES INSTRUCTIONS D'ENTRETIEN SONT DESTINÉES PAR PERSONNEL QUALIFIÉ SEULEMENT . POUR REDUIRE LE  

       RISQUE DE CHOC ÉLECTRIQUE NE PAS EFFECTUER TOUT ENTRETIEN AUTRE QUE CELLES CONTENUES DANS TEH MODE D'EMPLOI  

       SAUF SI VOUS ÊTES QUALIFIÉ POUR LE FAIRE”

Summary of Contents for CMD SUPER COMBO K1









Reviews: