4. Setting the unit
4.1Rear Panel
4.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to
change the mode. Once the required mode has been selected, press
ENTER
button to
setup . Back to the functions without any change press
MENU
button. The main functions
are shown below:
MULTIPAR 162/3 User Manual/Manual de uso P 3
EN
1
.
DMX input:
For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
2.
Display:
To show the various menus and the selected functio
3.Menu
To select the program functions
4.Up
To go forward in the selected functions
5.Down
To go backword in the selected functions
6.Enter
To confirm the selected funtions
7.
Mains input
：
Connect to supply mains power.
8.
DMX
output
：
For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
