5. When LCD displays “READY TO FAZER”, press “FUNCTION” button five times, then the
LCD shows“ FAN SPEED 100%”. In this mode, user can adjust the speed of fanby pressing
“UP/DOWN”buttons (the range is from 1% to 100%).
6. When LCD displays “R EADY TO FAZER”, press “FUNCTION” button six times, then the
LCD shows “DMX 512”. In this mode, user can adjust the DMX address by pressing
“UP/DOWN”buttons.There are two DMX channels for this Fazer machine. Channel one is for the
fan speed, and channel two for Haze output.
7. When LCD displays “READY
TO FAZER”, press “FUNCTION” button seven
times, then the
LCD shows “FLUID SENSOR ”. In this mode, user can set the status of “ low-fluid protection” by
pressing“UP/DOWN”buttons.
8. When LCD displays “READY
TO FAZER”, press “FUNCTION” button eight
times, then the
LCD shows “DIRECT TIMER”. In this mode, user can set the ON/OFF of “ TIMER memory
function” by pressing
“UP/DOWN”buttons.
9. When LCD displays “READY
TO FAZER”, keep pressing the “MANUAL” button can force
the machine to generate 100% full haze
output. As soon as releasing MANUAL button, the unit
stops spraying fog immediately.
How to release the “ Low-fluid protection”
When the machine is with low haze fluid or no fluid, the LCD will display “
EMPTY FLUID” .
1. After refilling haze liquid, keep pressing “ MANUAL ”
button until the display does not
flickering.
2. Press “ FUNTION”
button and navigate to “ FLUID SENSOR ” . Set the status to “OFF” .
Technical Specifications
Voltage used
AC 100~120V,
AC 220V-240V 50/60HZ
Fuse
8A/250V
Power
900W
Pre-heating time
2.5min
Smoke output
3500cuft/min
Tank capacity
3.5L
N.W.
19.5kg
G.W
20.5kg
Machine’s Size
534
×
510
×
207mm
Package size
600
×
590
×
265mm
MF 900 PRO - 4 -
User Manual/Manual de Uso
EN
