8
1.
Put the
121 STEREO
on the fl oor
vertically;
2
. Mount ‘Tripods stands’ (not included) near
the
121 STEREO
and insert the fi rst
module insert the fi rst
module
on the top of each tripod;
3.
Use the fi rst ‘long’ jack cable to connect
the ‘Power Out LEFT” of the
121
subwoofer to the LEFT
module input.
Use the second ‘long’ jack cable to connect
the ‘Power Out RIGHT” of the
121
subwoofer to the RIGHT
module input;
4.
If you have
system 2S
or
system 4S
, take the second, the third and the
fourth modules and fi x them on the top of
the fi rst one through the equipped junctions
(pivot) with the angle you prefer (repeat this
step for each
column);
5.
Take 1 or 3 ‘short’ jack cables and link
each module with the close one as shown
in the table (repeat this step for each
column);
6.
Put 1 jack cap to the uncovered output of
last
module;
7.
Use the “Velcro band” to link long cables;”
8.
Link the power cord (230 V) and turn on
your system.
INSTALLATION
AC
/
LONG CABLE
TRIPOD STANDS
JACK CAP
STRAP CABLE
AC
/
SHORT CABLE
Summary of Contents for ERGO 1S 121
Page 1: ...OWNER S MANUAL v_30_june_2017...
Page 4: ...3 WHAT S IN THE BOX...