Series BG
6
The software version number will be displayed for a short time followed by "FLtA". The
following secondary functions of keys are used during the configuration process.
ADVANCE
Step through menu choices
ENTER
Select a menu choice
ESCAPE
Quit any function (no change)
&
Increment or decrement displayed values
The following list shows all configuration options.
Italics
indicate factory settings.
FLtA - Analog filter
FA 0
2.5 Hz RC filter disabled
FA 1
2.5 Hz RC filter enabled
FLTd - Digital filters
FC 1
No filtering of current (displayed) readings
FC 2
Average of 2 samples for each reading
FC 4
Average of 4 samples for each reading
FC 8
Average of 8 samples for each reading
FP 1
No filtering of peak readings
FP 2
Average of 2 samples for each peak reading
FP 4
Average of 4 samples for each peak reading
FP 8
Average of 8 samples for each peak reading
232 - RS-232 settings
232d
Output Disabled
232E
Output Enabled
300
300 baud
600
600 baud
1200
1200 baud
2400
2400 baud
4800
4800 baud
9600
9600 baud
7-1E
7 data bits, 1 stop bit, even parity
7-1o
7 data bits, 1 stop bit, odd parity
7-2E
7 data bits, 2 stop bits, even parity
7-2o
7 data bits, 2 stop bits, odd parity
7-2n
7 data bits, 2 stop bits, no parity
8-1E
8 data bits, 1 stop bit, even parity
8-1o
8 data bits, 1 stop bit, odd parity
8-1n
8 data bits, 1 stop bit, no parity
8-2n
8 data bits, 2 stop bits, no parity
Ft F
Full data (n units)
Ft n
Numeric data only
out - Outputs selection (other than RS-232)
SP d
Set point outputs disabled
SP E
Set point outputs enabled
