14
7. Carefully remove
Magnetic Impeller
Assembly
and
Impeller Housing
(Fig.9).
Separate and clean Impeller Assembly
with cleaning brush (not included).
Rinse thoroughly with cold water.
Inspect Impeller Assembly and purchase
new part if excessive wear or damage is
evident.Wipe down inside and outside
surface of Filter Box with a clean cloth.
Rinse with cold water. Reinstall parts.
8. Install new Rite-Size Filter Cartridge.
MODEL 330 ONLY
Reinstall Media Baskets and install new Rite-Size Cartridges.
9. Replace BIO-Wheel Assembly and Bracket. Reinstall Power
Filter on aquarium and restart. Check water flow and
BIO-Wheel rotation. Replace cover.
Clean equipment works best. Regular care keeps
your unit operating at peak efficiency. Record the
maintenance performed and the date below.
MAINTENANCE
MAINTENANCE
LOG
LOG
MAINTENANCE
DATE
MAINTENANCE
DATE
15
Magnetic
Impeller
Assembly
Impeller
Housing
FIGURE 9
BIO-Wheel
Spillway
Proper water
flow.
FIGURE
10a
When filtered through a clean cartridge,
water returns to the aquarium via the
BIO-Wheel Spillway
(Fig. 10a).
As dirt collects on the filter cartridge,
the cartridge gradually becomes clogged
and water flow slows.Water begins to
f low from the area around the
Intake Tube
(Fig.10b).When this occurs, the cartridge
needs to be replaced.
NOTE: Carbon loses its effectiveness over time depending on fish
population, waste load and aquarium conditions. For optimum
aquarium filtration, genuine Marineland Rite-Size Filter Cart-
ridges are your ideal choice.Unlike other limited-capacity cartridges
that may contain inferior carbon substitutions, Rite-Size
Cartridges contain Black Diamond 100% unmixed, superior grade
activated filter carbon...the perfect filter media for all aquariums.
I
mproper water
flow. Time for a
cartridge change.
Intake Tube
FIGURE 10b
