27
9.
Depth profile graph
If you press the lower button (ENTER), when the GRAPH item on the MENU screen is highlighted, you will
be redirected to the simple graph browser. The first available graph is called ‘depth profile’ and contains a
representation of dive depth vs time, as shown below:
1 -
Top button role (now – go to next graph: swim route graph)
2 -
Time of first recorded data (hh:mm, 24-hour system)
3 -
Date of first recorded data (DD.MM / YYYY)
4 -
Average depth (if it can be evaluated)
5 -
Maximum depth (if it can be evaluated)
6 -
Route number in memory (blue) and lower button role (now – go to the next route number)
Note:
–
The internal device memory stores all dive data identified by ‘route number’. When the device is
switched on, the least available (empty) route number is chosen for recording current data. If all
available route numbers (1-50) are used, the oldest one will be overwritten.
–
Data recording can be paused (HOLD state). The graph above does not show these breaks.
–
You may tilt device to left or right to change the button roles on this screen. When tilted left, the lower
button switches to the previous route number. When tilted right, the lower button will allow you to
delete the current route.
– If the recording time is less than 1 minute, the record will be deleted when the device is switched off.
Summary of Contents for Seacraft ENC II
Page 1: ...1 ...
Page 11: ...11 5 Main screen layout After power on the device display will show this content ...
Page 50: ...50 ...
Page 51: ...51 ...
