background image

sMRT Crewguard User Manual v1.1

MRT Ltd. © 2014

8

 Overview

The Sea Marshall® Crewguard lone worker monitoring system provides 

24/7 MOB health and safety cover for organisations which have employees 

spread out over very large areas, with individuals often working alone either 

on or next to water. This system has been used at water reclamation plants, 

refuelling jetties and fish farms both at sea and in shore.

7.1 UNMANNED AREA CREWGUARD® lone worker man overboard   

      MONITORING system

This system is made up of the following components

• 

1 × Cabinet mounted Crewguard® CG-121 MKII monitor alarm

(with auto-dialler depending on requirement)

• 

1 × High gain external antenna with 20m cable, (plus fixtures and fittings). 

(External siren with strobe light if required).

• 

MOB alerting units (PLBs) as required (sold separately) with optional lifejackets

This system provides automatic 24/7 man overboard cover for all types of 

jetties and large areas of water, it is an automated version of the Crewguard 

system which uses a telephone auto-dialler (either land-line based or GSM) 

to notify key persons if there is a MOB incident.

(For further information refer to Alerting Unit handbook)

PRODUCT NAME – CREWGUARD LONE WORKER MONITORING SYSTEM

(For declaration of conformity refer to individual component products in this manual)

Summary of Contents for sMRT Crewguard CG-121













Reviews: