sMRT AU10 User Manual v1.8
MRT Ltd. © 2014
3
1
Introduction
The following symbols and conventions are used to indicate important
information. Always observe these instructions.
WARNINGS:
Instructions that, if ignored, could result in death or
serious personal injury caused by incorrect operation of the
equipment. These must be observed for safe operation.
CAUTIONS:
Instructions that, if ignored, could result in personal
injury or material damage caused by incorrect operation of the
equipment. These must be observed for safe operation.
Important Note
: Important instructions that should be adhered to
during system operation.
Typographic Conventions
1. Hardware features are displayed in bold uppercase letters, e.g.
ARMING SWITCH
.
2. Operation states are displayed in bold uppercase letters surrounded
by square brackets, e.g.
[OFF]
.
Using your sMRT AU10 for the First Time
Carefully read the
Warnings and Safety Information
section in this
manual prior to using the sMRT AU10 for the first time. To operate
correctly, the sMRT AU10 should be professionally fitted to an MRT
approved PFD by a service centre authorised by MRT. Visit the MRT
website
www.mrtsos.com
for specific instructions on accessing the
sMRT AU10.
Prior to first use perform a full
system test
to confirm the device is
operating correctly.
WARNING:
DO NOT unzip the main PFD zip. Use the sMRT AU10
access point zip in the life jacket to prepare the device for use.
