Assembly Instructions:
1. Unscrew the nut from the bulkhead assembly. Install the bulkhead with the rubber gasket inside the overflow
body. Hand tighten the nut from the bottom of the overflow body. Insert the PVC Pipe with Vent Tube into the
bulkhead opening on the inside of the overflow body. Place the noise-reducing cylinder foam sleeve over the
PVC pipe with vent tube.
2. Unscrew wing nut from nylon screw. Insert nylon screw into black surface overflow box and attach to the
overflow body, slide black surface overflow box up and down to desired water level. Hand tighten wing nut to
the back side of the hanging bracket of the overflow body.
